The smoked oak engineered timber flooring
Smoking refers to the natural oxidation/ageing process of the oak
timber, where the boards are fumed or ‘smoked’ for three days with
ammonia vapour. This vapour chemically reacts with the tannin in
the oak and causes it to deepen in colour to a level that the oak
would otherwise reach naturally over 20-30 years. The advantage of
smoking is that it achieves a natural colour which permeates all
the way through the 2-3 mm wear layer. The smoking also gives the
boards an attractive tonal variation from pale to mid tone plus
veining within individual boards. These finishes rely on the tonal
variance of the smoked base colour to achieve a finish and subtlety
that is not possible with other staining processes.
Yorking Hardwood supply the smoked oak engineered timber with the
standard dimenssion 190*1900*15/3mm , 190*1900*12/3 or 2 .We even
can make it 21mm thick with 6mm wear layer .
1. Due to the camera settings,all products photos from Yorking
Hardwood shall not be garanteed 100% same to our real wood floor.
2. Natural wood color variations shall not be considered as quality
problem and a short piece of wood plank can never be a full
representation of our wood flooring overviews.Samples are needed to
make sure you are purchasing the wood flooring with correct color